Filter
Top Products
26 LongView IP KVM Extender Installer/User Guide
2. Choose option 1 to access the Receiver Menu and enter the password if necessary. The
Receiver Main Menu will appear.
3. Press 8 to select Console Settings and press Enter. The Console Settings Menu will appear.
4. Enter the number corresponding with Session Retry and press Enter. The Session Retry Menu
will appear.
Figure 3.14: Session Retry Menu
To change the retry settings:
1. Access the Session Retry Menu via the serial menu as described in the previous procedure.
2. To change the time interval between retry attempts, press 1 to select the Session Retry Timeout
Seconds otpion and press
Enter. You will be prompted to enter a new timeout value in SS
(seconds) format.
3. Type a value between 1 and 60 (inclusive) and press Enter.
4. To confirm your selection and exit the screen, type 0 (zero) and press Enter.
Audio Performance Settings
You can use this option to modify the audio performance settings or to disable audio support. There
are three settings available: high, medium and off. The high setting provides the best audio
performance and should be used when high network bandwidth is available.
NOTE: To ensure that audio operates correctly, configure the receiver and the transmitter with identical audio
performance settings.
To change the audio performance setting for the receiver and transmitter:
1. Activate the serial menu as described in Accessing the serial menu on page 12.
2. Choose option 1 to access the Receiver Menu or option 2 to access the Transmitter Menu. If
the password option is enabled, you will be prompted for a password.
3. Type the password and press Enter. The Transmitter Main Menu will appear.