Filter
Top Products
22 LongView IP KVM Extender Installer/User Guide
2. Choose option 2 to access the Transmitter Menu and press Enter. If the password option is
enabled, you will be prompted for a password. See
Authentication on page 20.
3. Type the password and press Enter. The Transmitter Main Menu will appear.
4. Press 2 to select Security Configuration and press Enter. The Security Configuration Menu
will appear.
Figure 3.12: Transmitter Security Configuration Menu
To disable or enable the transmitter password:
1. Press 1 to select Console Password on the Security Configuration Menu and press Enter. If a
password has been enabled, this action will disable the password.
2. If a password has been disabled, you will be prompted to enter a password.
3. Type the new password and press Enter.
NOTE: Each password must consist of ASCII characters and contain between 6 and 64 characters.
4. Confirm the new password. If successful, you will see a message stating that the password has
been changed.
5. Press Enter.
6. To save your changes and exit the menu, type 0 (zero) and press Enter.
To change the transmitter password:
1. Press 2 to select Change Console Password on the Security Configuration Menu and press
Enter. You will be prompted to enter your current password.
2. Type your current password and press Enter. You will be prompted to enter the new password.
3. Type the new password and press Enter.
NOTE: Each password must consist of ASCII characters and contain between 6 and 64 characters.
4. Confirm the new password. If successful, you will see a message stating that the password has
been changed.