Filter
Top Products
Chapter 3: Operations 15
8. Type 0 (zero) and press Enter to return to the Network Configuration Menu, or if you made a
mistake and do not wish to save changes to the network settings, type
C and press Enter.
9. To confirm your changes and apply those settings type 0 (zero) and press Enter.
10. A system message will appear that states Connection to the transmitter is lost. You will be
automatically returned to the Appliance Selection Menu
screen.
11. Choose option 1 to access the Receiver Menu. If the password option is enabled, you will be
prompted for a password.
12. Type the password and press Enter. The Receiver Main Menu will appear.
Figure 3.4: Receiver Main Menu
13. Press 1 to select Network Configuation option and press Enter. The Network Configuration
Menu will appear.
14. Press 1 to select the Transmitter IP Config option and press Enter. The Transmitter IP
Configuration Menu will appear. The old transmitter IP address is displayed beside menu
option 1.
Figure 3.5: Transmitter Configuration Menu on the Receiver