Filter
Top Products
Configuration Possibilities
AXIS 5500 / AXIS 5550 User’s Manual 101
Section 11 Configuration Possibilities
This section describes some special features offered by the AXIS
5500/AXIS 5550:
Autodetect Printer Type, on page 101
Auto-IP, on page 101
Changing Language in the Print Server’s Web Interface, on page 119
E-mail Notification, on page 102
Enabling Secure Web Services — SSL/TLS, on page 121
Flashloading New Firmware into the Print Server, on page 119
IPP (Internet Printing Protocol), on page 102
Logical Printers for Customized Printing, on page 111
Network Speed, on page 118
NetWare Packet Signature Levels, on page 118
Overriding Port Status, on page 123
TCP/IP Restrictions, on page 120
Autodetect Printer Type
The print server can automatically detect the type of printer you are using
if you enable Autodetect Printer Type. The print server can then
recognize Epson and Hewlett Packard InkJet printers. Most Epson and
Hewlett Packard InkJet printers that have Mac OS printer drivers for
network printing are supported. If Autodetect Printer Type is disabled,
the AppleTalk printer type has to be specified manually in the print
server. For Epson InkJets it would be "EPSONLQ2" and for HP InkJets it
would be "DeskWriter". If the print server does not recognize the
connected printer the default setting, "LaserWriter" will be used as printer
type. "LaserWriter" is the recommended setting to be used with all
PostScript printers.
To enable Autodetect Printer Type, log in to your print server’s Web
interface and select Admin | Network Settings | Detailed View |
Macintosh | Auto Detect Printer Type | Yes.
See the Help pages in the print server’s Web interface for details.
Auto-IP
In the absence of an IP address management mechanism such as DHCP,
the print server will receive a temporary IP address automatically over