Filter
Top Products
The Parameter List
AXIS 5500 / AXIS 5550 User’s Manual 157
NetWare Parameter Combinations
When NetWare is enabled (i.e. when the NETW_ENB. parameter is set to
“yes” in the NetWare Menu), the different settings of the
NETW_TRANSPORT_PROTOCOL. and NDPS. parameters will result in
these functionalities:
Functionality 1. Raw TCP ports 9100 = LPT1 and 9101 = USB1 are opened for NDPS
printing. To create TCP NDPS printer objects, AXIS_PRINT_SYSTEM must
be enabled (see Note a).
2. The HP-MIB is enabled.
3. Services are SAP'ed and enabled on SPX sockets 8060 and 4114 (see
Notes b and c).
4. Print services are SAP'ed and enabled on SPX sockets, 400C = LPT1
and 401C = USB1 (see Notes b and c).
5. Pure IP queue mode printing is enabled.
6. IPX queue mode printing is enabled (see Note c).
7. Looking for SAP NetwWare fileservers on the net (see Note c).
Notes: (a) TCP printing must be enabled (TCP_ENB. = YES).
(b) Some other SAP service must be present on the network.
(c) At least one frametype must be enabled for NetWare.
NETW_ENB NETW_TRANSPORT_PROTOCOL NDPS Functionality
YES DUAL_STACK TCP_AND_SPX 1, 2, 3, 4, 5, 6, 7
YES DUAL_STACK TCP_ONLY 1, 2, 3, 5, 6, 7
YES DUAL_STACK SPX_ONLY 2, 3, 4, 5, 6, 7
YES DUAL_STACK DISABLED 3, 5, 6, 7
YES IP_ONLY TCP_AND_SPX 1, 2, 5
YES IP_ONLY TCP_ONLY 1, 2, 5
YES IP_ONLY SPX_ONLY 2, 5
YES IP_ONLY DISABLED 5
YES IPX_ONLY TCP_AND_SPX 2, 3, 4, 6, 7
YES IPX_ONLY TCP_ONLY 2, 3, 6, 7
YES IPX_ONLY SPX_ONLY 2, 3, 4, 6, 7
YES IPX_ONLY DISABLED 3, 6, 7