Filter
Top Products
22
AXIS Q7406 - Pan Tilt Zoom
Pan Tilt Zoom
Installing PTZ devices
AXIS Q7406 supports several PTZ devices. Please see www.axis.com for a complete list of supported devices, and to obtain the
correct driver. Follow the instructions below to install a PTZ device:
1. Using an appropriate cable, connect the device to your selected port (RS-422 or RS-485). These ports are available
via the I/O terminal connector. See pages 60 and 62 for more information.
2. In the setup tools, go to Setup > System Options > Ports & Devices is RS-485 is selected for configuration.
3. Select Pan Tilt Zoom from the Usage drop-down list.
4. Click Upload to install a PTZ driver.
(PTZ drivers are available from the Axis Web site at www.axis.com)
5. Click Port Options... to modify the port settings. The default values correspond to the values specified by the PTZ
driver.
6. From System Options > Ports & Devices, select the port configured for PTZ and then select the video source to
use with the device.
7. If required, click the Advanced Options button to make further settings and see the online help .
Note:
Advanced users and application developers can also use the Axis Application Programming Interface and HTTP specifi-
cation for generic control of PTZ devices using CGI commands or a TCP/IP client. Please refer to the Axis website at
www.axis.com for further information.