Filter
Top Products
Component Names and Functions
1-5
Before You Start Using This Printer
1
ee
ee
Paper Guides
The positions of the guides can be adjusted to
match the width of paper loaded in the
multi-purpose tray. The tray is also fitted with paper
limit guides, and paper can be loaded up to the
bottom of these guides. (See p. 2-18)
ff
ff
Auxiliary Tray
This tray should be extended when paper is loaded
in the multi-purpose tray. Make sure you extend this
tray before loading paper in the multi-purpose tray.
gg
gg
Extension Tray
Open the extension tray when loading longer paper
sizes, such as A4 paper, to prevent the paper from
hanging out of the tray.
hh
hh
Ventilation Slots (Air Intake)
These slots draw air into the printer to cool the
internal components.
ii
ii
Grips for Moving
When you are carrying the printer, put your hands in
these grips and grasp the printer firmly. (See p.
5-39)
jj
jj
Power Switch
This switch turns the printer ON and OFF.
Rear View
aa
aa
Ventilation Slots (Exhaust)
The exhaust slots are used to cool the internal
printer components.
bb
bb
Lock Release Levers
Turn these levers to remove the fuser unit when you
are replacing the fuser unit or clearing paper jams
from the fuser unit. (See p. 7-22)
cc
cc
Power Socket
Connect the supplied power cord to this socket.
dd
dd
Fuser Unit
This unit fixes the toner to the paper.
ee
ee
Sub-Output Tray
Collects output paper with the printed side facing up.
(See p. 2-12)
ff
ff
USB Socket
The USB cable plugs into this socket. This is used to
connect the printer to the USB port on a computer,
etc. (See p. 1-13)
gg
gg
Expansion Slot
This expansion slot is used for installing the optional
internal network board. (See p. 6-12)
hh
hh
Ventilation Slots (Exhaust)
The exhaust slots are used to cool the internal
printer components.
a
h
fed
b
c
g