Filter
Top Products
Section 3: Setup for NetWare
28 Axis NPS 530/532 User’s Manual
Verify the Communication
To verify communication by making a test printout, just send a job to
one of the print queues that NPS 530/532 will service. Use CAPTURE,
NPRINT, or PCONSOLE.
Example: Use CAPTURE from the DOS command line when you are logged into
the network, to print out the autoexec.bat file from the root of drive C:
The CAPTURE switches have the following meanings: /L=1 captures the
printouts sent to the PC LPT1 port, /Q=DESKTOP specifies the print
queue, /NOTIFY enables user messages, /TI=30 sets the time-out to 30
seconds, /NT specifies no tab expansion, /FF ends the printout with a
Form Feed, and /NB disables the banner page.
CAPTURE /L=1 /Q=DESKTOP /NOTIFY /TI=30 /NT /FF /NB
COPY C:\AUTOEXEC.BAT LPT1: