Filter
Top Products
Section 7: Setup for Macintosh
Axis NPS 530/532 User’s Manual 53
Section 7
Setup for Macintosh
The basic setup for Macintosh is done by opening the Chooser window
and clicking a printer.
Before configuring your Macintosh system, you may want to configure
the NPS 530/532 (e.g. logical printer definitions). See Appendix A for
details.
If you intend to operate your NPS 530/532 in a multi-protocol environ-
ment, you should also proceed according to the other “Setup for...” sec-
tions as appropriate.
Before you begin:
• Make sure that the NPS 530/532 is powered on and attached to the
network.
• Any network configuration should always involve the network
manager.