Filter
Top Products
Appendix A: The parameter list
Axis NPS 530/532 User’s Manual 73
The Config File
The remainder of this appendix contains the complete NPS 530/532
parameter list. The left column shows the parameters and their default
values as they appear in the config file, and the right column contains
brief descriptions of the parameters. For a full description of the
parameters, please refer to the NPS Print Server Technical Reference.
--- CONFIG MENU
NODE_ADDR. : 00 40 8C 11 00 86
Node Address
ROOT_PWD. : pass
Root Password
USERS. :
User Authority and Printer Access
--- TCP/IP MENU
TCP_ENB. : YES
TCP/IP Protocol Enabled
INT_ADDR. : 192 36 253 80
Internet Address
DEF_ROUT. : 0 0 0 0
Default Router Address (0.0.0.0 for no router)
NET_MASK. : 0 0 0 0
Net Mask (e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
TCP_KEY. :
TCP/IP Protocol Key
PROS_PWD. : netprinter
PROS Protocol Password
PROS_PRT. : 35
PROS TCP Port Number
LPD_BANN. : YES
LPD Banner Page Enabled
BOOTP_ENB. : YES
BOOTP Protocol Enabled
RARP_ENB. : YES
RARP Protocol Enabled
RTN_OPT. : YES
Reverse Telnet Options Enabled
RTEL_PR1. : 0
PR1 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR2. : 0
PR2 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR3. : 0
PR3 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR4. : 0
PR4 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR5. : 0
PR5 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR6. : 0
PR6 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR7. : 0
PR7 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR8. : 0
PR8 Reverse Telnet TCP Port Number (0 for Disabled)
--- SNMP MENU
READ_COM. : public
Read-Only Community Name
WRT_COM. : pass
Read-Write Community Name
TRAPADDR. : 0 0 0 0
SNMP Trap Internet Address
TRAP_COM. : public
SNMP Trap Community Name
SYS_CONT. :
System Contact
SYS_NAME. :
System Name
SYS_LOC. :
System Location
SNMP_AUT. : DISABLED
Authentication Failure Traps
TRAP_PRT. : DISABLED
Printer Traps