Filter
Top Products
3. Getting Started
3. GETTING STARTED
Overview
• Powering the Base Unit on an d off
•BasicUse
• Advanced Use
• Use of an iOS device with ClickShare Link
• User Interface
• Capture mode
• Shared desktop: primary - extended
•Audioconfiguration
• Pairing
3.1 Powering the Base Unit on and off
About power mode
You can power on and off the Base Unit and bring the system in standby mode. In standby mode the system m utes the ou tput signal
to the display. If yo ur display supports this, it will automatically enter power sav ing mode.
To power on the Base Unit or awake it from standby
1. When the Base Unit is shut down, set the rocker switch at the back of the Base Unit to “I”.
Refer to image 3-1.
Image 3-1
Rocker switch
2. If the system does not start up automatically, push the standby button s hortly.
Refer to image 3-2.
R5900001 CLICKSHARE 21/11/2013
11