30/05/02 Document Systems Support V1.0
12
17. In the top window where it says name or address of server providing LPD,
enter the IP address of the copier separated by a dot
18. In the bottom window enter “lp” for the queue name.
19. Click “OK”
20. NT will now go and look for this port so make sure the copier is switched on
and connected to the network.
21. Now escape out of this until you get back to the main screen where you
should have a window that looks like this.
22. Now click “Next”
23. Now choose “Have disk”
24. Browse the CD-ROM to the driver folder, which can be found at
e:\english\driver\nt4 where “e:\” is the letter of your CD ROM drive.
25. Click “OK”.
26. Then “Next” and give the printer a name.
27. Click “Next”