Filter
Top Products
30/05/02 Document Systems Support V1.0
4
Introduction
The network interface card in the DP series works only with the TCP/IP protocol (the
same protocol used by the Internet). This protocol must be loaded on your desktop
PC and/or Server for network printing to work.
If you are not currently running this protocol it can be added to your system from
your Windows CD, please consult your Windows documentation for further
information.
The DP series also requires a static TCP/IP address. If your Server is using DHCP
you will need to give an address outside the DHCP scope or if it is within the scope a
reservation must be added. Please consult your Network Administrator if you are
unsure if your network uses DHCP or not.
The network interface card in the DP series has a RJ45 connection only. If you have
any other type of connector please refer to your network administrator for
assistance.
The network interface card also auto-detects your network speed, either 10 or 100
megabits per second.