Filter
Top Products
30/05/02 Document Systems Support V1.0
6
Stage 2
What Next?
Now you have programmed your DP unit you now need to install the printer driver
on your PC.
Follow these instructions to add the DP unit as a printer. You will need the CD-ROM
that came with your DP unit. This contains the printer driver and the program that’s
needed to enable peer to peer printing.
You can download the latest printer driver from our Web Site at the following link:
http://www.panasonic.co.jp/mgcs/download/index.html
1. Place the CD-ROM into your computer drive; the disk will auto run and display
a menu, you can read the manual from here or simply close this window to
proceed.
2. Open Windows Explorer and browse to the following folder:
E:\english\lpr (Where E: is the letter of your CD ROM drive)
3. Double click on the file “Setup.exe”
4. Follow the instructions on the screen to install this program. You will need to
re-boot your system after this program has installed.
5. After re-booting your system, leave the CD-ROM in your drive and proceed as
follows.
6. Click on “start” the “settings” then “printers”
7. Double click on “add printer”
8. Choose “next”
9. Click “local printer”
10. Then choose “have disk”
11. Browse your CD-ROM drive and scroll down to the printer driver folder which
can be found at e:\english\driver\win9x (where “e:\” is the letter of your
CD ROM drive).
12. Click “OK”.
13. Click “OK”.
14. Choose your DP unit model’s number.
15. When you get the port menu choose “LPT1” – we will alter this later for
network printing.
16. Windows will now install the driver files.
17. When finished you should end up with a printer icon in your printer’s folder.
Do a right hand mouse click and highlight “properties” this will then bring up
a menu.