Filter
Top Products
Windows 2000 BarcoMed Nio software installation
44 System manual E1
Adapters" in the "Device Manager Control Panel". The second
device will be disabled. This is normal. Do NOT try to enable
any of the disabled display adapters.
8. The “Device Confirmation” screen displays the device driver
that will be installed and if DualView will be enabled or not.
If you want to change your selection, click “Back” to return
to the Device Selection Screen. Click “Next” to begin
installing the driver. Click “Cancel” to abort the driver
installation.
Caution: Once you click “Next”, you cannot cancel the driver
installation.
Prior to beginning the installation the BarcoMed Driver Install
Wizard will warn you that while the driver is being installed
your display may flicker. Click “OK” to continue.
9. When the screen shown in figure 23 below and figure 24 on
page 45 appears, click “Yes” or “Continue Anyway” to
continue. This screen may appear multiple times.
Figure 23: Windows 2000 Digital Signature Not Found Warning