Filter
Top Products
NioWatch operation
74 System manual E1
display controller head. In that way you can easily see which
display is connected to which head.
The Display tab allows to view information about the display.
The Graphic Board tab allows to view information about the
display controller.
The Calibration tab allows to calibrate the display(s) or view the
result of the last calibration.
Display tab
•In the Display Info section, you can view the name and
serial number of the selected display.
For Nio (E-XX20) displays, you can also view:
• To select another display function, select an item from the
Display Function drop-down box.
If the selected display has been calibrated to the selected
display function in the past, the display will be set according
to this calibration. If no former calibration was found, default
factory settings are selected.
When you restart NioWatch, the last selected display function
is automatically selected.
• Lifetime: Operation time including time in stand-by
• Runtime: Operation time excluding time in stand-by
• Firmware version: Version of internal display software
• Backlight Stabilization:Status of the backlight stabilization in the
display.