Filter
Top Products
User Guide SETUP COMPUTER
MGP D5 19
SETUP COMPUTER
Before setting-up, switch off all equipment.
The projector may be connected to up to three computer sources
simultaneously, using the VGA and DVI inputs.
The VGA interface is analog and may cause some noise in the
projected image, depending on the signal quality from the VGA
graphics card in the computer.
The DVI (Digital Visual Interface) interface is all-digital and will
yield a projected image with very low noise.
Connect the USB cable to allow for remote mouse control.
Connect the power cord.
Connect the RS232 interface to allow for individual or global
control of multiple units in a daisy chain configuration.
Connect the LAN connector for individual control and monitoring
of multiple projectors over LAN.