Barco MGP D5 Projector User Manual


 
User Guide MOUSE CONTROL
MGP D5 37
MOUSE CONTROL
You may control the computer mouse functions using the remote
control.
In order to enable this function, connect a USB cable between the
computer and the projector. Ensure that the PC has an operating
system that supports USB (Windows™ 98 2nd edition or newer).
As long as the menu system on the projector is not activated, the
tracker ball on the remote control will now emulate the mouse
movements. When the menu system is activated, the tracker ball
is used for menu navigation. (See menu system chapter).
Point the remote control directly at the IR receiver in the front or
in the rear. Move the mouse pointer by rolling the tracker ball in
the direction required. The LEFT key emulates the left mouse key,
while the RIGHT key emulates the right mouse key.
The pointer movement may not be as smooth as you are used to
with you ordinary mouse, due to the reduced bandwidth of the
infrared remote control connection.