Filter
Top Products
SAFETY & WARNINGS User Guide
6 MGP D5
Only place the projector on a stable surface, or mount it securely
using an approved ceiling-mount.
Do not drop the projector.
Always operate the projector horizontally, within the range of the
adjustable rear feet. Operating the unit in other positions may
reduce lamp life significantly, and may lead to overheating,
resulting in malfunctioning.
Always allow ample airflow through the projector. Never block
any of the air vents. Never cover the unit in any way while
running. Allow for sufficient distance to walls and ceilings to
avoid overheating. Minimum safety distance to any side of the
unit is 50 cm/20" in any direction.
CAUTION! Hot air is exhausted from the side vent. Do not place
objects that are sensitive to heat nearer than 50 cm/20" to the
exhaust vent.
The projector is designed for indoor use only. Never operate the
unit outdoors.
Do not operate the projector outside its temperature and
humidity specifications, as this may result in overheating and
malfunctioning.
Only connect the projector to signal sources and voltages as
described in the technical specification. Connecting to unspecified
signal sources or voltages may lead to malfunction and
permanent damage of the unit.
Allow the unit to cool down for 60 minutes before lamp change.