Filter
Top Products
User Guide SAFETY & WARNINGS
MGP D5 5
SAFETY & WARNINGS
This user guide contains important information about safety
precautions and the set-up and use of the projector. Please read
the manual carefully before you operate the projector.
SAFETY
This device complies with relevant safety regulations for data
processing equipment for use in an office environment. Before
using the projector for the first time, please read the safety
instructions thoroughly.
WARNING
Use only the cables and cords supplied with the projector or
original replacement cables. Using other cables or cords may lead
to malfunction and permanent damage of the unit.
Always use 3-prong power cord to ensure proper grounding of
the unit. Never use 2-prong power cords, as this is dangerous and
could lead to electrical shock.
Never open the unit. The projector contains no user serviceable
parts. Refer all repairs to qualified personnel only.
Make sure that no objects enter into the vents and openings of
the set. Do not spill any liquids on the projector or into the vents
or openings of the unit.
Always remove lens cap before switching on the projector. If the
lens cap is not removed, it may melt due to the high energy light
emitted through the lens. Melting the lens cap may permanently
damage the surface of the projection lens.
Do not look into the projection lens when the projector is
switched on. The strong light may permanently damage sight.
Do not look into the laser beam when activated on the remote
control. Laser light may permanently damage sight. Do not point
laser beam on people.