Barco R9000904 Projector User Manual


 
AC power connection
6-1
5976284 BARCOGRAPHICS 808s 150403
ONOFF
POWER / MAINS
800 peripherals
RGB
Comp-/H-SyncV-Sync
COMM. PORT PORT 3
PORT 4/5
V-nom
I-nom
Freq
See installation instructions before connecting to the suppl y.
Voir la notice d’installation avant de raccorder au rØseau.
120/230 V
7/5 Amp
50/60 Hz
DEFOCUS OFF - ON
75 Ohm
X-POS Y-POS
green : operation
red : standby
PORT 2
PORT 1
OFF - ON
75 Ohm
PROJECTOR MODE
This device complies with part 15 of
the FCC rules. Operation is subject to
following two conditions (1). This
device may not cause harmful inter-
ference , and (2) this dev ice must
accept any interference received
including interference that may cause
undesired operation"
6
AC POWER CONNECTION
AC Power (mains) cord connection
Use the supplied cord to connect your projector to the wall outlet. Plug
the female power connector into the male connector at the back of the
projector.
This projector may be connected to an IT-power system. The IT-
power system is a power distribution system having no direct connec-
tion to earth. Instead, the exposed conductive parts of the electrical
installation are earthed.
Preparing your power cord
Mains lead (power cord) with CEE7 plug
As the colors of the wires in the mains lead of this apparatus may not
correspond with the colored markings identifying the terminals in your
plug, proceed as follows:
The yellow/green wire is ground and must be connected to the
terminal in the plug which is marked by the letter E or by the safety
earth symbol or colored yellow and green.
The blue wire is neutral and must be connected to the terminal
marked with the letter N or colored black.
The brown wire is the line and must be connected to the terminal
marked with the letter L or colored red.
The wires of the delivered mains lead (power cord) are colored in
accordance with the following code :
Yellow and Green : Ground (Earth).
Blue : Neutral.
Brown : Live.
Power cord with an ANSI 73.11 plug
The wires of the delivered mains lead (power cord) are colored in
accordance with the following code :
Yellow and Green : Ground (Earth).
White : Neutral.
Black : Live.