Filter
Top Products
Messages, warnings and failure codes
9-2 5976284 BARCOGRAPHICS 808s 150501
WARNING :
go to
stand by
Projector will switch to 'Standby'
when the RCVDS is no longer
available.
WARNING :
invalid
frequency
input
The entered frequency or
applied frequency of the source
is out of the projector's range.
WARNING :
default
settings
loaded in
the E2PROM
Adjustment settings are lost.
Reload using Projector Control
Software via PC or MAC (if this
option is available), or readjust
image.
table is
deleted
Message to inform that selected
table is deleted. This message
will be followed by 'confirm
message', on which the user has
to answer.
FAILURE
invalid
RWI soft
version
Wrong software version in your
projector.
Call for technical support.
FAILURE
I
2
C error
addr. : 7FH3
Hardware failure. Call a
qualified service technician for
repair.
FAILURE
short
circuit on
I
2
C bus
Hardware failure. Call a
qualified service technician for
repair.
FAILURE
RCVDS com-
munication
error
Serial communication error
between RCVDS and projector.
FAILURE
RWI commu-
nication
error
Hardware failure. Call a
qualified service technician.
FAILURE
IRIS commu-
nication
error
Communication error between
IRIS and the projector. Call a
qualified service technician.
WAIT
starting
up
IRIS
Message during the start up of
the IRIS.
Message will disappear when the
IRIS is ready to accept com-
mands.