Barco R9000904 Projector User Manual


 
Source connections
7-1
5976284 BARCOGRAPHICS 808s 150403
4/5 Component video 8
with Tri-level sync
R, G and B with composite sync on Green;
3 RGB 3 R, G and B with separate composite or with separate Horizontal
and Vertical sync.
Port No Projector input Numeric button Description of input signal
1 For future expansion -
2 For future expansion -
7
SOURCE CONNECTIONS
Signal input connection
The following signals can be connected to the projector through the
inputs on the back panel of the projector :
RGB
Component Video
RGB with Tri-level sync
Component video with Tri-level sync
R, G and B with composite sync on Green;
4/5 RGB 4 or 5 R, G and B with separate composite or with separate
Horizontal and Vertical sync.
R-Y, Y, B-Y with composite sync on Y;
4/5 Component video 6 or with separate composite or with separate Horizontal and
Vertical sync.
R, G and B with Tri-level sync on Green;
4/5 RGB with Tri-level sync 7 R, G and B with separate Tri-level sync or with separate
Horizontal and Vertical Tri-level sync.
R-Y, Y, B-Y with Tri-level sync on Y; or with separate Tri-level
sync or with separate Horizontal and Vertical Tri-level sync.
Only available when the optional Tri-level sync module is installed.
ONOFF
POWER / MAINS
800 peripherals
RGB
Comp-/H-SyncV-Sync
COMM. PORT PORT 3
PORT 4/5
V-nom
I-nom
Freq
See installation instructions before connecting to the supply.
Voir la notice d’installation avant de raccorder au rØseau.
120/230 V
7/5 Amp
50/60 Hz
DEFOCUS OFF - ON
75 Ohm
X-POS Y-POS
green : operation
red : standby
PORT 2
PORT 1
OFF - ON
75 Ohm
PROJECTOR MODE
123 4
5
This device complies with part 15 of
the FCC rules. Operation is subject to
following two conditions (1). This
device may not cause harmful inter-
ference, and (2) this device must
accept any interference received
including interference that may cause
undesired operation"