CONTROLLING
CONTROLLING
CONTROLLING
CONTROLLING
R5975059A BARCOVISION 708 200498
R5975059A BARCOVISION 708 200498
5-6
5-6
Press the ADDRESS key (recessed key on the RCU) with a pencil and enter the
address with the digit buttons. That address can be any digit between 0 and 9.
When programming '0', zero address, the RCU will control a projector regardless of
the projector's address. This feature allows multiple projectors with different
addresses to be controlled by a single RCU.
How to program an address into the RCU?
Input selection
Two possible ways of selecting an input :
a) With the digit buttons on the RCU, it is possible to select one of the four input
sources, Video, S-Video, RGsB or RGBS, RG3sB or RGB3S, (R-Y)Ys(B-Y) or
(R-Y)Y(B-Y)S, (R-Y)Y3s(B-Y) or (R-Y)Y(B-Y)3S.
b) With the local keypad :
press first the ADJUST key to display the
General access menu.
Source No Projector input Press digit button
1 Comp. Video 1
2 S-Video*/Comp. Video
1
2
3 RGBS or RGsB** 3
4 RGB3S or RG3sB*** 4
5 (R-Y)Y(B-Y)S or
(R-Y)Ys(B-Y)**** 5
6 (R-Y)Y(B-Y)3S or
(R-Y)Y3s(B-Y)***** 6
Press the ADDRESS key (recessed key on the RCU) with a pencil and enter the
address with the digit buttons. That address can be any digit between 0 and 9.
When programming '0', zero address, the RCU will control a projector regardless of
the projector's address. This feature allows multiple projectors with different
addresses to be controlled by a single RCU.
How to program an address into the RCU?
Input selection
Two possible ways of selecting an input :
a) With the digit buttons on the RCU, it is possible to select one of the four input
sources, Video, S-Video, RGsB or RGBS, RG3sB or RGB3S, (R-Y)Ys(B-Y) or
(R-Y)Y(B-Y)S, (R-Y)Y3s(B-Y) or (R-Y)Y(B-Y)3S.
b) With the local keypad :
press first the ADJUST key to display the
General access menu.
Source No Projector input Press digit button
1 Comp. Video 1
2 S-Video*/Comp. Video
1
2
3 RGBS or RGsB** 3
4 RGB3S or RG3sB*** 4
5 (R-Y)Y(B-Y)S or
(R-Y)Ys(B-Y)**** 5
6 (R-Y)Y(B-Y)3S or
(R-Y)Y3s(B-Y)***** 6