Filter
Top Products
52
52
TROUBLESHOOTING
What devices can I connect to the USB?
The currently supported devices are USB printers.
I get disconnected from the AP after a while.
Some clients such as PDAs and laptops disconnect automatically if the connection is
idle for a while. You will need to change the dial-up networking settings on your PDA
or laptop.
The system LED on the AP stopped flashing.
This is due to some internal errors in the AP. The AP is designed to clear many of
these errors and reset itself. However, it may need to be reset (by a power cycle).
When using Bluetooth, I cannot discover the AP from a client.
Sometimes you have to try discovery multiple times if the time period for the discovery
is too short. If you have a changeable device discovery time, try to use at least a
10-second discovery period.
P74181_F8T030_man.qxd 1/10/03 5:34 PM Page 52