Filter
Top Products
(No.PA019)1-33
5.3 ERROR LOG (SELF-DIAGONOSIS RECORD AND INDICATION)
5.3.1 Outline
By using the special setting and adjustment software, data related to abnormal operation (history) stored in the projector can be load.
On the basis of contents "LED (INDICATOR) WARNING INDICATONS" set and lamp use time, internal and external temperature, and
other data prior to the previous usage time can be viewed as a table.
z HOW TO LOAD THE DATA FROM UNIT
(1) Install the software in a personal computer and connect
by RS-232C IN terminal (use cross cable).
(2) Set the projector to stand-by mode.
(3) Start the setting and adjustment software. The main
menu shown in Fig.1 appears.
(4) Click the [Error Log] button to show the screen indicated
in Fig.2.
(5) Click the [Receive Log Data] button to display the history.
z ERROR LOG SCREEN ITEMS
5.3.2 Error code
5.3.3 Function
Item Displayed contents
Error Detection Error event code (10 types)
Wakeup Count Number of times operation mode reached
System Time Total time in operation mode until present
Lamp Time Total lamp lighted time until present
Slave Deg (Out) External temperature detected by sensor dur-
ing error event
Sub Deg (In) Internal temperature detected by sensor dur-
ing error event
Error cord Detected condition Indicated LED
E01 Lamp can not light during shift from stand-by to operation mode STAND BY + LAMP (Blinking)
E02 Lamp use time exceeds 2000h LAMP (Blinking)
E03 Inter IC bus communication error (ACK receive error) Absent
E06 Lamp extinguishes during projection OPERATE + LAMP (Blinking)
E07 Cooling fan stops (fan lock) All (4 LEDs Blinking)
E08 Set internal temperature (lamp area) abnormally high (Exceeds 70°C) TEMP (Blinking)
E09 Set internal temperature (ventilation intake openings) abnormally high (Exceeds 62°C) STAND BY + TEMP (Blinking)
E10 Lamp use time exceeds 1900h LAMP(Light on)
E11 Error in device drive circuit operation LAMP + TEMP (Blinking)
E15 Come off lamp cover OPERATE + LAMP
(Alternately blinking)
E20 When the sleep time function operated and the lamp goes out Absent
Button (item) Function Data process
Receive Receive data stored in projector and display < Error log > screen Projector to PC
Reset Delete all data stored in projector (reset) Projector internal
Clear Display Delete record (history) shown on < Error log > screen (delete computer side) PC internal
Save Save record (history) shown on < Error log > screen to file PC internal
Load Read record (history) stored in PC and display in < Error log > screen PC internal
Fig.1 Start screen (main menu)
Fig.2 <Error log> screen
Click