Filter
Top Products
2726
USING YOUR KVM SWITCHUSING YOUR KVM SWITCH
during KVM setup before they remain in a consistent location.
The Main Page
Group Column
The “Group” column displays the name of the group to which the server
has been assigned. The group name is assigned by the KVM Switch’s
administrator (see the “Administrator Setup Page” section for information
on changing the group name). The “Computer Name” list can be sorted
on this field by clicking on the column header.
Computer Name Column
The “Computer Name” column displays the name of each connected
computer/server. The computer name can be set by the KVM Switch’s
administrator (see the “Server Page” section below for information on
changing the computer name). The computer list can be sorted on this
field by clicking on the column header.
ID Column
The ID column displays the BANK and port number of the KVM Switch
where the computer is connected. The computer list can be sorted on this
field by clicking on the column header.
Keyboard Column
The “Keyboard” column shows the status of the current keyboard
connection, and is updated in real time. If the connection to the computer
is via a PS/2 cable, a small keyboard icon is displayed. If the keyboard
connection to the computer is via USB, the USB trident symbol is
displayed. If no keyboard is detected, the cell will be empty.
Mouse Column
The “Mouse” column shows the status of the current mouse connection,
and is updated in real time. If the connection to the computer is via a
PS/2 cable, a small mouse icon is displayed. If the mouse connection to
the computer is via USB, the USB trident symbol is displayed. If no mouse
is detected, the cell will be empty.
Security Column
This column displays the security settings for the current user. If this user
is blocked from accessing a computer, a closed-padlock symbol is
displayed. If the user is allowed to access the computer, the cell is empty.
Note: The KVM administrator can prevent computers from appearing in
the Main View if the user doesn’t have rights to access them. (For
additional information, see the “Options Page” section.)
Console Column
The Console currently viewing the computer is indicated in this column
by its corresponding letter (A-D). If multiple Consoles are focused on the
same computer, the letter of one that has control of the computer will
appear in the Console cell.
Scan Button
Click the “Scan” button or press “Alt+A” on the keyboard to activate the
AutoScan feature. This will not close IntelliView.
Setup Button
Click the “Setup” button or press “Alt+S” on the keyboard to access
IntelliView’s setup pages. If the user is not logged in as the administrator,
the setup button will not be selectable (will appear gray).
The setup pages are only accessible to one Console at a time. If two
administrators attempt to access the setup pages simultaneously, the
second administrator will be presented with an error message.
P74042_F1DE108E_man.qxd 5/6/02 10:06 AM Page 26