Filter
Top Products
28
Manually Configuring your Modem-Router
Manually Configuring your Modem-Router
29
section
2
1
3
4
5
6
7
NAT Mapping Table
NAT Mapping Table
displays the current
NAPT (Network Address
Port Translation) address
mappings. The NAT
address mappings are
listed 20 lines per page,
click the control buttons
to move forwards and
backwards. As the NAT
mapping is dynamic, a
Refresh button is provided
to refresh the NAT
Mapping Table with the
most up-to-date values.
The content of the NAT Mapping Table is described as follows:
• Protocol - protocol of the flow.
• Local IP - local (LAN) host’s IP address for the flow.
• Local Port - local (LAN) host’s port number for the flow.
• Pseudo IP - translated IP address for the flow.
• Pseudo Port - translated port number for the flow.
• Peer IP - remote (WAN) host’s IP address for the flow.
• Peer Port - remote (WAN) host’s port number for the flow.
Route
These pages define
routing related
parameters, including
static routes and Routing
Information Protocol (RIP)
parameters.
Static Route Parameters
Static routing is the
manual method used to
set up routing. A network
administrator enters
routes into the Modem-
Router using the following
screens. This method has
the advantage of being predictable, and simple to set up. It is easy to
manage in small networks but does not scale well.
Parameter
Description
Index
Displays the number of the route.
Network
Address
Displays the IP address of the remote computer
for which to set a static route.
Subnet Mask
Displays the subnet mask of the remote network
for which to set a static route.
Gateway
Displays the WAN IP address of the gateway to
the remote network.
Configure
Allows you to modify or delete configuration
settings