Filter
Top Products
8
Setting up your Computer
Setting up your Computer
9
section
2
1
3
4
5
6
7
In order for your computer to properly communicate with your Modem-
Router, you will need to change your computer’s “TCP/IP Ethernet”
settings to “Obtain an IP address automatically/Using DHCP”. This is
normally the default setting in most home computers.
Manually Configuring Network Adapte atsiV swodniW ni sr
1. Click “Start”, “Control Panel”
2. Double-click on the “Network and Sharing Center” icon and then select
"Manage network connections"
3. Right-click on the “Local Area Connection” associated with your network
adapter and select “Properties” from the drop-down menu.
4. In the “Local Area Connection Properties” window, click “Internet
Protocol Version 6 (TCP/IPv6)” and click the “Properties” button.
5. If not already selected, select “Obtain an IP address automatically”
and “Obtain DNS server address automatically”. Click “OK”.
6. In the “Local Area Connection Properties” window, click “Internet
7. If not already selected, select “Obtain an IP address automatically”
and “Obtain DNS server address automatically”. Click “OK”.
8. If your telephone service and ADSL service are on the same, your network
adapter(s) are now configured for use with the Modem.
Manually Configuring Network Adapters in Windows 7
1. Click “Start”, “Control Panel”, "Network and Internet"
"Change adapter settings"
3. Right-click on the “Local Area Connection” associated with your network
adapter and select “Properties” from the drop-down menu
4. In the “Local Area Connection Properties” window, click “Internet
Protocol Version 6 (TCP/IPv6)” and click the “Properties” button.
5. If not already selected, select “Obtain an IP address automatically” and
“Obtain DNS server address automatically”. Click “OK”.
6. In the “Local Area Connection Properties” window, click “Internet
7. If not already selected, select “Obtain an IP address automatically” and
“Obtain DNS server address automatically”. Click “OK”.
8. If your telephone service and ADSL service are on the same, your
network adapter(s) are now configured for use with the Modem.
Manually Configuring Network Adapters in Windows XP,
2000, or NT
1. Click “Start”, “Settings”, and then “Control Panel”.
2. Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network Connections” icon (Windows
XP).
3. Right-click on
the “Local Area
Connection”
associated with your
network adapter and
select “Properties”
from the drop-down
menu.
4. In the “Local
Area Connection
Properties” window,
click “Internet
Protocol (TCP/
IP)” and click the
“Properties” button.
5. If not already selected, select “Obtain an IP address
automatically” and “Obtain DNS server address automatically”.
Click “OK”.
Your network adapter(s) are now configured for use with the Modem-
Router.