Belkin F5D8055tt Network Card User Manual


  Open as PDF
of 155
 
39
Table of Contents 1 2 3 4 65
N+ Wireless USB Adapter
SECTION
TROUBLESHOOTING
I can’t connect to the Internet wirelessly.
If you are unable to connect to the Internet from a wireless computer,
please check the following items.
1. Look at the lights on your wireless router. If you’re using a Belkin
Wireless Router, the lights should be as follows:
•The“Power”lightshouldbeon.
•The“Connected”lightshouldbeon,andnotblinking.
•The“WAN”lightshouldbeeitheronorblinking.
If your Belkin Wireless Router’s lights have the above characteristics,
go to number 2 below.
If this is NOT the case, make sure:
•Therouter’spowercordispluggedin.
•Allcablesareconnectedbetweentherouterandthemodem.
•Allthemodem’sLEDsarefunctioningcorrectly.Ifnot,seeyour
modem’s user manual.
•Reboottherouter.
•Rebootthemodem.
If you continue to have issues, please contact Belkin Technical Support.
If you are not using a Belkin Wireless Router, consult that router
manufacturer’s user guide.
2. Open your wireless utility software by clicking on the icon in the
system tray at the bottom right-hand corner of the screen. The tray
icon should look like this (the icon may be red or green):
3. The window that opens should have a list of “Available Networks”.
Available networks are wireless networks to which you can connect.
If you are using a Belkin 802.11g (G Plus) Router, or Belkin 802.11g
(54g) Router, “Belkin54g” is the default name.
If you are using a Belkin 802.11b Router, the default name should be
“WLAN”.
If you are NOT using a Belkin Router, please consult your router
manufacturer’s user manual for the default name
 previous next