Filter
Top Products
8
INSTALLATION
Verifying Proper Installation (Windows 2000)
After installation is complete, check the Windows Device Manager to
confirm that all components of the PCI Card have been properly
installed.
1. Right-click on “My Computer”.
2. Select “Properties”.
3. Select the “Hardware” tab and click on the “Device Manager” button.
4. Click the plus sign (+) next to “Universal Serial Bus Controllers”.
The “Universal Serial Bus Controllers” list will now include two “NEC USB
Open Host Controller” entries, one “Belkin USB 2.0 Hi-Speed Host
Controller” entry, one “USB 2.0 Root Hub Device” entry and two “USB
Root Hub” entries.
Note: If your computer features built-in USB ports, or if you have other
USB PCI controllers installed, you will see additional “root hub”
entries.
5. Click the plus sign (+) next to “IEEE 1394 Bus Controller”. The “IEEE
1394 Bus Controller” list will now include one “NEC Firewarden OHCI
Compliant IEEE 1394 Host Controller” entry.
Note: If your computer features built-in IEEE 1394 ports, or if you have
other IEEE 1394 host controllers installed, you will see additional
“IEEE 1394 Host Controller” entries.
P73954ea-A_F5U508ea_uk 28-03-2003 14:27 Page 8