Filter
Top Products
1
2
3
4
5
6
section
44
4-3 User Management Menu Options
Users
1
2
3
4
5
6
7
User Management
The RIPM comes with a pre-configured user account for the administrator
that has fixed permissions. This user has all possible rights to configure the
device and to use all functions the RIPM offers. Upon delivery, the account for
the user “administrator” has the password “belkin”. Make sure to change the
password immediately after you have installed and accessed your RIPM for the
first time. A full list of available options follows. This list can only be seen by
the administrator.
1. Existing Users
Select an existing user for modification. Once a user has been selected, click
the “lookup” button to see the user information.
2. New Username
The new username for the selected account.
3. Password
The password for the login name. It must be at least four characters long.
4. Confirm Password
Confirmation of the password above.
5. Email Address
This is optional.
6. Mobile Number
This is also optional.
7. Role
In addition to being an administrator or an ordinary user, each user can be a
member of a group (named a “role”). Choose the desired role from the
selection box.
To create a new user, press the “Create” button. The “Modify” button changes
the displayed user settings. To delete a user, press the “Delete” button.
Note: The RIPM is equipped with a host-independent processor and memory
unit, both of which have a limitation in terms of processing instructions and
memory space. To guarantee an acceptable response
time, Belkin recommends that you do NOT exceed a total of 25 users
connected to the RIPM at the same time. The memory space that is available
on the RIPM depends on the configuration and usage of the RIPM (log file
entries, etc.).