Filter
Top Products
33
N Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 6 7 8 9
10
5
ALTERNATE SETUP METHOD
Setting your Connection Type to Dynamic/Fixed IP (1483 Bridged)
This connection method bridges your network and ISP’s network
together. The Router can obtain an IP address automatically from your
ISP’s DHCP server or accept a fixed IP address assigned by your ISP.
6. VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here. (Assigned by your ISP).
7. Encapsulation – Select your encapsulation type (supplied by
your ISP) tospecify how to handle multiple protocols at the ATM
transport layer.
VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation) allows
only one protocol running per virtual circuit with fewer overheads.
LLC: PPPoA Logical Link Control allows multiple protocols running
over one virtual circuit (more overhead).
8. MTU – Enter the MUT value for your ISP.
9. Disconnect after of x minutes of no activity – Checking the box
and enter the number of minute that you want the modem router to
auto disconnect after no activity. After this time has been exceeded,
the connection will be terminated.
Click “Apply Changes” to save and activate your settings. To go back
to the original settings before saving, click “Clear Changes”. Or click
any of the Quick-Navigation links for other options. Your new settings
will not be saved unless your click “Apply Changes”.