Filter
Top Products
70
N Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Changing System Settings
The “System Settings” page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on
and off the NAT function of the Router.
Setting or Changing the Administrator Password
4. You will see one more message. This message tells you that the Router
may not respond for as long as one minute as the firmware is loaded
into the Router and the Router is rebooted. Click “OK”.
5. A 60-second countdown will appear on the screen. When the
countdown reaches zero, the Router firmware update will be
complete. The Router home page should appear automatically. If not,
type in the Router’s address (default = 192.168.2.1) into the navigation
bar of your browser.
The Router ships with NO password entered. If you wish to add a
password for greater security, you can set a password here. Write down
your password and keep it in a safe place, as you will need it if you
need to log into the Router in the future. It is also recommended that
you set a password if you plan to use the remote management feature
of your Router.