Filter
Top Products
34
N Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 6 7 8 9
10
5
ALTERNATE SETUP METHOD
For Static IP connection:
1. IP assigned by ISP – Select “No” if your ISP instructed you to use
fixed IP.
2. IP Address – Enter an IP address assigned by your ISP for the Router
WAN interface.
3. Subnet Mask – Enter a subnet mask assigned by your ISP.
4. Default Gateway – Enter a default gateway IP address assigned by
your ISP.
5. VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameters here. These identifiers are assigned by
your ISP.
6. Encapsulation – Select the LLC or VC MUX your ISP uses.
Click “Apply Changes” to save and activate your settings. To go back to
the original settings before saving, click “Clear Changes”. Or click any of
the Quick-Navigation links for other options. Your new settings will not
be saved unless your click “Apply Changes”.
For Dynamic IP connection:
1. IP assigned by ISP – Select “Yes” if your ISP instructed you to use
Dynamic IP.
2. VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here. These identifiers are assigned by
your ISP.
3. Encapsulation – Select LLC or VC MUX your ISP uses.
Click “Apply Changes” to save and activate your settings. To go back
to the original settings before saving, click “Clear Changes”; or click
any of the Quick-Navigation links for other options. Your new settings
will not be saved unless you click “Apply Changes”.