Filter
Top Products
46
N Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Using Wi-Fi Protected Setup
WPS uses WPA2 (described below) for encryption. It does not provide
additional security, but rather, standardizes the method for securing your
wireless network. You may use either the Push Button Configuration
(PBC) method or PIN method to allow a device access to your wireless
network. Conceptually, the two methods work as follows:
PBC: Push and hold the WPS button located on the back of your
Router for three seconds. Then initiate the WPS procedure on the client
device within two minutes. Refer to your client’s documentation on this
procedure. Pushing the PBC button will automatically enable WPS. The
client has now been securely added to your wireless network.
PIN: The client device has a PIN number (either four or eight digits) that
is associated with WPS. Enable WPS through the GUI shown below.
Enter the client’s PIN into the Router’s internal registrar (accessed
through this GUI). The client will be automatically enrolled into your
wireless network within two minutes.