Filter
Top Products
En
AutoScan Mode:
Enable AutoScan mode
To enable AutoScan mode, press [SCROLL LOCK] [SCROLL LOCK] [0] [0]. In AutoScan mode,
the OmniView
™
PRO remains on one port for a number of seconds, before switching to the
next. This time interval is set in the On-Screen Display menu.
NOTE: There is no mouse or keyboard control in this mode. This is necessary to
prevent errors. Otherwise, if the user is moving the mouse or using the keyboard
when the OmniView
™
PRO switches to the next port, data flow is interrupted and
will cause erratic mouse movement and/or the wrong characters to show up when
using the keyboard.
To get out of AutoScan mode, press the SPACEBAR.
13
Usage (continued)
Bank 0 (Master)
Bank 2 (Slave)
etc...
Bank 4 (Slave)
etc...
Bank 1 (Slave)
F1D116_OSD_AM_man.qxd 4/20/00 4:07 PM Page 13