Filter
Top Products
41
Step 4: Configuring your Belkin Wireless Cable/DSL Router
(the Router) for connection to the Internet
Static IP Setup
Configuring Your Router if your Provider uses Static IP Addressing
If your ISP uses Static IP Addressing, follow this procedure. If your
provider uses PPPoE, then skip to the next section.
1. Click on “Initial Setup”. The following screen will appear:
2. Select “Static IP Address” and click “Select”. The following
screen will appear:
3. Enter your static
IP address.
4. Enter your Subnet
mask.
5. Enter the Router
address.
6. Once you have
filled in all of this
information, click
“Enter”.