Filter
Top Products
53
Other Features
Special Application Settings
Some applications require
multiple connections, such as
Internet gaming,
videoconferencing, Internet
telephony and others. These
applications may not work when
Network Address Translation
(NAT) is enabled. If you need to
run applications that require
multiple connections, use the
following screen to specify the additional public ports to be opened for
each application. Specify the port normally associated with an application
in the “Trigger Port” field, select the protocol type as TCP or UDP, then
enter the public ports associated with the trigger port to open them for
inbound traffic.
Note: If an application still cannot function correctly after enabling
multiple ports via the Special Application screen, you may have to open
the client PC for full Internet access using the DMZ Host option.
Client Filter Settings
Click on “LAN Client Restrictions”. The Router can be configured to
restrict Internet access to computers at specific days and times. For
example, to restrict web access to the client at IP address 192.168.2.15
enter “15” and “15” in the IP field.
Enter 80 (HTTP and Web) in the
Port field. Select TCP. Select Block.
Then select “Monday” and “Friday”
then select “8:00AM” to “5:00PM”.
Lastly, click “Enable” and then
click enter. Now the client at IP
address 192.168.2.15 will not
have Internet access from 8:00AM
to 5:00PM.