Filter
Top Products
Introduction10
Remote control description
1. Power (Refer to "Start up" on page 21 and "Shutdown" on page 27 for more infor-
mation)
Turns the projector on or off.
When the projector is in standby, press once to turn the projector on.
When the projector is on, press twice to switch the projector to standby.
2. Freeze
The image is frozen when Freeze is pressed. An icon " " will display in the lower
right corner of the screen.
To release the function, press Freeze again or the Source button.
3. 5Up,6Down
4. 3Left, 4Right
When the on-screen menu is activated, the Up/Down/Left/Right buttons are used as
directional arrows to select the desired menu items and to make adjustments.
5. Menu (Refer to "Using the menus" on page 37 for more information.)
Turns on the On-Screen Display (OSD) menu.
6. Auto keystone
Automatically corrects distorted images resulting from an angled projection.
7. Keystone (Refer to "Correcting keystone" on page 25 for more information.)
Manually corrects distorted images resulting from an angled projection.
8. Page Up and Down
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing
Page Up and Page
Down on the remote control
.
9. Wireless
Press this button to display the Wireless Connection menu.
10. Swap (Refer to "Making wireless presentation" on page 30 for more information.)
When the Wireless Connection menu is displayed, press this button to change the
wireless connection mode between 802.11 a and 802.11 b/g.
1
2
3
4
5
3
6
7
8
9
10
11
12
13
14
15