BenQ CP120 Projector User Manual


 
Using the projector32
suitable mode. The selected mode will display on the projected Wireless Connection
menu. Current wireless connection channel will also display.
The 802.11 a mode may not be available on the projectors sold in certain countries/areas due
to local regulations.
8. When the projector is discovered by the computer, the name of the projector and
signal strength will appear in the Wireless Wizard window on the computer. If it
doesn’t, click the Refresh List button to try again.
If the projector still can’t be found, check the following:
• Is the computer too far away from the projector? Move the computer closer to the projector
and click the Refresh List button in the Wireless Wizard window to try again.
• Are there other wireless networks nearby? Press the CH. or AUTO/CH. button to change
wireless connection to a different channel and try again.
• Are the TCP/IP settings correctly set? Refer to "Checking the TCP/IP settings of your
computer" on page 29 for details.
Current wireless connection mode
Current wireless connection channel
Name of the projector
Name of the discovered projector
Signal strength