Filter
Top Products
Introduction 15
Warning messages on the back of the remote control
The laser beam is visible. It is necessary to press and hold LASER for
continuous output.
The laser pointer is not a toy. Parents should be mindful of the dangers of
laser energy and keep this remote control out of the reach of children.
Refer to the warning labels on the back of your remote control for safe operation on the laser
pointer.
9. BRIGHTNESS
Displays the Brightness adjustment bar. To
adjust the value, press the directional
arrow buttons on the projector or remote
control.
10. CAPTURE
Captures the projected image and save it
as your startup screen. See "Creating your
own startup screen" on page 42 for details.
11. PIP
Turns the Picture In Picture (PIP) window
on or off. See "PIP (Picture In Picture)
operation" on page 41 for details.
12. LED indicator light
Lights red when any button on the remote
control is pressed.
13. MODE
Depending upon which input signal is
selected, selects an available picture setup
mode. See "Application Mode" on page 48
for details.
When a wireless module is installed and
the Wireless Connection menu is
displayed, press this button to change
among LAN, IEEE 802.11 a, and IEEE
802.11 b/g. (The wireless module is
available through BenQ retailers.)
14. FREEZE
The image is frozen when FREEZE is
pressed. To release the function, press any
button (except LASER) on the projector
or remote control. See "Freezing the
image" on page 42 for details.
15. MUTE
Toggles projector audio between on and
off.
16. AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 35 for
details.
When a wireless module is installed, the
Wireless Connection menu is displayed
and the IEEE 802.11 a is selected, press
this button to search for a reliable channel.
(The wireless module is available through
BenQ retailers.)
17. SOURCE
Sequentially selects the input signal D-Sub
(Analog RGB), Comp. (YPbPr), DVI-A,
DVI-D, Video, or S-Video. See "Switching
input signal" on page 34 for details.
18. LASER
Emits visible laser pointer light for
presentation purposes.
The Laser Pointer is a presentation aid for
professionals. It emits red colored light
when you press it and the LED indicator
lights up red.
WARNING: Do not look into the laser light
window or shine the laser light beam on
yourself or others. See the warning
messages on the back of the remote
control and the attached ''User
Information'' prior to using it.
19. DIGITAL ZOOM buttons (+, -)
Magnifies or reduces the projected image
size.
20. PAGE UP and PAGE DOWN
Operate your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint). See "Remote paging
operations" on page 42 for details.