Filter
Top Products
Operation46
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various
adjustments and settings.
There are 17 different OSD menu languages. See "System setup: Basic menu" on page 50 for
details.
Below is the overview of the English OSD menu.
The following example describes the adjustment of Keystone with the English OSD menus.
The adjustment methods mentioned below can also be applied when using different OSD
language other than English.
1. Press MENU/BACK on the projector or
remote control to turn the OSD menu
on.
4. Press ENTER to display the
keystone correction page.
2. Use Left/ Right to select the
DISPLAY menu.
3. Press Up/ Down to select Keystone.
5. Based on the image shape
displayed on the screen, press
the keystone buttons ( / Up,
/Left, /Down, /
Right) to adjust the image to
a rectangular or square one.
6. Press MENU/BACK on the
projector or remote control
twice* to leave and save the
settings.
*The first press leads you back to the
main menu and the second press
closes the OSD menu.
Current input signal
Main menu icon
Main menu
Sub-menu
Highlight
Press MENU/
BACK to the
previous
page or to
exit.
Status
KEYSTONE
Back