Filter
Top Products
Operation 47
Display menu
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Aspect Ratio
(Auto)
There are four options to set the image's aspect ratio depending on your
input signal source.
See "Selecting the aspect ratio" on page 37 for details.
Keystone
(0)
Corrects any keystoning of the image. See "Correcting keystone" on page
35 for details.
Position
(0)
Displays the position adjustment page. To move the projected image,
use the directional arrow buttons. The values shown on the lower
position of the page change with every button press you made until they
reach their maximum or minimum.
Phase
(depends on the
selected input
source)
Adjusts the clock phase to reduce image
distortion.
H. Size
(depends on the
selected input
source)
Adjusts the horizontal width of the image.
Digital Zoom
(100%)
Magnifies or reduces the projected image. See "Searching for details on
the projected image" on page 35 for details.
Pan
Displays the Pan page for searching the details of the projected image by
using the directional arrow buttons on the projector or remote control
after the image is magnified.
PIP Settings
PIP (Off)
Turns the PIP window on or off
Source (Video)
Selects the source for the PIP.
Position (Top-Left)
Selects a desired position for the PIP.
Size (Large)
Selects a suitable size for the PIP.
Saturation (0)
Adjusts the color saturation level.
Hue (0)
Adjusts the red and green color tones of the image.
See "Saturation" on page 48, "Hue" on page 48, "PIP (Picture In Picture)
operation" on page 41 for details.