Filter
Top Products
Operation42
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to
using the paging function.
You can operate your display software program (on a connected PC)
which responds to page up/down commands (like Microsoft
PowerPoint) by pressing Page Up and Page Down on the remote control.
See "Connecting a computer" on page 22 for details.
If remote paging function doesn't work, check if the USB connection is
correctly made and the mouse driver on your computer is updated to
the latest version.
Freezing the image
Press the FREEZE button on the remote control to freeze the image.
'FREEZE' will display in the upper right corner of the screen. To release
the function, press any button (except LASER) on the projector or remote
control.
Even if an image is frozen on the screen, the pictures are running on the
video or other device. If the connected devices have active audio output,
you will still hear the audio even though the image is frozen onscreen.
Creating your own startup screen
In addition to selecting the projector preset startup screen from among BenQ logo, Black or
Blue screen, you can make your own startup screen that is an image projected from your
computer or video source.
1. Project the image you want to use as your startup screen from either a computer or
video source.
2. Press CAPTURE on the remote control or go to the SYSTEM SETUP: Basic > My
Screen menu, press ENTER.
3. A confirmation message displays. Press CAPTURE or ENTER again.
4. The message 'Screen Capturing...' displays while the projector is processing the image.
Please wait.
5. If the action is successful, you see the message 'Captured Succeeded' on the screen. The
captured image is saved as My Screen.
6. To view the captured image displayed as the startup screen, set My Screen in the
SYSTEM SETUP: Advanced > Splash Screen menu and restart the projector.
In the unlikely event that the capturing action fails, change your target image.