Filter
Top Products
Operation
88
FUNCTION DESCRIPTION
Standby
Settings
Network
Selecting On enables the function, and the projector can be
monitored or controlled over a network when it is in standby mode.
Microphone
Selecting On enables the function, and the microphone can be used
even in standby mode
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 and
MONITOR OUT jacks are correctly connected to devices. See
"Connecting a monitor" on page 25 for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
The Monitor Out only works when an appropriate D-Sub input is
made to the COMPUTER 1 jack.
Network
Settings
Wired LAN
See "Controlling the projector through a LAN environment" on page
50 for details.
Wireless LAN
See "Controlling the projector through a LAN environment" on page
50 for details.
Remote Desktop
See "Displaying image through Q Presenter" on page 60 for details.
Projection Log in code
See "Using the Projection Login Code" on page 64 for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings, Baud Rate.
5. SYSTEM SETUP: Advanced menu