Filter
Top Products
Operation 69
ii. If you don't see the file on the “ScalingFix” volume, you may need to double-click
the disk image icon on the desktop.
iii. Double-click “PointDraw Scaling Fix”. The installer should run, follow the
prompts.
iv. Right-click on the “ScalingFix” disk image icon on the desktop, and choose
“Eject” to un-mount the volume.
v. If the USB device is already plugged-in, you'll need to un-plug and re-plug it in.
It is suggested to install the “ScalingFix.dmg” file on MAC OS 10.5.0 or higher.
PointDraw
TM
pen specifications
Shutting down the projector
1. Press Power on the projector. A
confirmation message displays prompting you.
If you don't respond in a few seconds, the
message will disappear. If you use the remote
control, press OFF to shut down the projector.
2. Press Power on the projector a second time.
The POWER indicator light flashes orange, the
projection lamp shuts down, and the fans will
continue to run to cool down the projector.
To protect the lamp, the projector will not respond to
any commands during the cooling process.
3. Once the cooling process finishes, the POWER
indicator light is a steady orange and fans stop.
4. Disconnect the power cord from the power
putlet if the projector will not be used in an
extended period of time.
• If the projector is not properly shut down, to protect the lamp, when you attempt to re-start
the projector, the fans will run for a few minutes to cool down. Press Power again to start
the projector after the fans stop and the POWER indicator light turns orange.
Operation frequency 2.4 GHz ISM Band
Rechargeable battery
Model name
Normal voltage
Normal capacity
1 pcs
CR17360A
3.6V
780 mAh
Storage temperature -10°C-60°C
Operation temperature
0°C-40°C
Operation humidity 20%-85% (ambient temperature<40°C)
Power consumption DC3.3V, 35 mA (operation)
Dimensions Length*Diameter=204*30 (mm)
Wei ght 72g
I
I
I
I