Filter
Top Products
Positioning your projector 13
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations:
1. Floor in front of screen;
2. Ceiling in front of screen;
3. Floor at rear of screen; or
4. Ceiling at rear of screen.
With the use of this wireless projector, there's no need to worry about cable
connections.This gives you the flexibility to site the projector anywhere in the room up to a
range of 20m away from your laptop, and switch between presentations on different laptops
instantly without fiddling with cables.
I. Floor front:
Select this location with the projector placed near the
floor in front of the screen. This is the most common
way to position the projector for quick setup and
portability.
II. Ceiling front:
Select this setting with the projector suspended from
the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mounting Kit
from your dealer to mount your projector on the
ceiling.
Set in the Source > Mirror menu after you turn
the projector on.
III. Floor rear:
Select this location with the projector placed near the
floor behind the screen.
Note that a special rear projection screen is required.
Set in the Source > Mirror menu after you turn
the projector on.
IV. Ceiling rear:
Select this location with the projector suspended from
the ceiling behind the screen.
Note that a special rear projection screen and the
BenQ Projector Ceiling Mounting Kit are required for
this installation location.
Set in the Source > Mirror menu after you turn
the projector on.