Filter
Top Products
Operation 27
Shutdown
1. Press Power and a confirmation prompt
message displays. To turn the projector
off, press Power again.
2. The Power indicator light flashes orange
and the lamp shuts down. The fans will
continue to run for approximately 90
seconds to cool down the projector lamp.
To protect the lamp, the projector will not
respond to any commands during the cooling
process.
3. Turn the main power switch off.
Note:
• Do not unplug the power cord before the projector shutdown sequence is complete or
during the 90-second cooling down process.
• If the projector is not properly shut down, to protect the lamp, when you attempt to re-
start the projector within minutes, the fans will run for a few minutes to cool down. Press
Power again to start the projector after the fans stop.