Filter
Top Products
Operation 33
4. Control menu
FUNCTION DESCRIPTION
Language
Language sets the language for the OSD control menus.
Use the 3 / 4 key to select the desired language from among English,
French, German, Italian, Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese and Korean.
OSD
OSD Pos.
Selects a desired OSD position.
OSD Time
Sets the length of time the OSD will remain active after your last button
press. The range is from 5 to 60 seconds.
Setup
Source Scan
Sets whether the projector searches automatically for input signals. If the
source scan is on, the projector will search for input signals until it
acquires a signal. If the function is not activated, the projector selects the
last input signal.
Keystone Hold
When selected, preserves the last keystone correction value even when the
projector is restarted.
Mirror Hold
When selected, preserves the last mirror correction value even when the
projector is restarted.
Blank Time
Determines the length of time before the projector will automatically
shutdown when Blank is activated.
Auto Off
Sets the length of time before the projector will automatically shutdown
when there is no input signal detected.
User Logo
Enables the user to select which logo screen will appear during projector
start-up. Three modes are available: Default (BenQ logo), black screen or
blue screen.
Preset Mode
Preset modes are provided so you can optimize your projector image set-
up to suit your program type.
For more information, refer to page 29.
Reset
Returns all settings to the factory preset values.